23176 CC W33 Spherical Roller Bearing 380×620×194 mm

Spherical roller bearing23176 CC W33

Boundary Dimension: 380×620×194 mm, Weight: 243kg.

Shape location tolerance should be to current standard.

Spherical roller bearing have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

Spherical roller bearing are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.

The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.

In addition to the standard range, offers a wide range of special spherical roller bearing adapted for specific applications.

Spherical roller bearing, whose inner rings have two raceway, and outer raceways are spherical. The centers of curvature of outer raceways are also the bearing centers. The bearings possess self-aligning performance, the permissible disalignment angle is 1-2.5 degree, and can be used in certain permanent deflective application.

These bearing are able to carry high radial loads, as well as axial loads at the same time, but not pure axial loads, the axial carrying bearing will be needed if axial loads were higher. The contact between rollers adn raceways are so close, so the friction is higher than cylindrical roller beairngs, and their limiting speed is lower.

The basic types of spherical roller bearings are type C and CA, according to different cages and whether inner rings are with ribs. Type C beairng has inner ring without rib, and use steel pressed cage. type CA bearing has inner ring with two ribs, and adopt machined solid cage.

Spherical roller bearings are especially suitable for applications required heavy or shock loads.

Spherical roller bearing23176 CC W33

1.Open bearings

Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.

C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.

CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring

CAF-- As CA, but with a steel cage.

ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.

ECAF-- As ECA, but with a steel cage.

E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring

With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the

- other series have a taper of 1:12, designation suffix K.

Spherical roller bearing 23176 CC W33

Boundary Dimensions				Basicload ratings		Designations	Mass	LimitingSpeeds
mm				KN		r/min
d	D	B	rmin	Cr	Cor	Current	kg	Grease	Oil
250	365	87	3	950	1650	2650	32.2	880	1100
260	360	75	2.1	886	1700	23952CA/W33	22.5	1100	1500
	400	104	4	1000	2450	23052	51.5	900	1200
	400	104	4	1000	2450	23052/W33	51.5	900	1200
	400	140	4	1690	3260	24052CA/W33	64.4	700	900
	440	144	4	1450	3320	23152	96	800	1000
	440	180	4	2660	5180	24152C/W33	113	60	750
	480	130	5	2160	3400	22252CA	105	850	1100
	480	174	5	2800	4550	23252C/W33	140	630	800
	480	174	5	2800	4550	23252CA	151	630	800
	480	174	5	2800	4550	23252CA/W33	151	630	800
	490	153	4	2070	3650	2652	140	760	1050
	540	165	6	2250	4190	22352	193	630	800
	540	165	6	2250	4190	22352/W33	192	630	800
280	380	75	2.1	800	1500	23956CA/W33	24.5	900	1200
	420	106	4	1100	2680	23056	62	850	1100
	420	106	4	1100	2680	23056/W33	61.5	850	1100
	420	140	4	1200	2800	24056CA/W33	67.2	800	1000
	460	146	5	1590	3630	23156	95.5	750	950
	460	180	5	2000	4100	24156CA/W33	119	750	950
	500	130	5	1690	3380	22256	126	800	1000
	500	130	5	1690	3380	22256/W33	124	800	1000
	500	176	5	2880	4900	23256	153	600	750
	500	176	5	2880	4900	23256/W33	152	600	750
	580	175	6	3500	5150	22356	238	600	750
	580	175	6	3500	5150	22356/W33	238	600	750
300	460	118	4	1260	3070	23060	75.2	800	1000
	460	118	4	1260	3070	23060/W33	74.6	800	1000
	460	160	4	2360	5010	24060C/W33	101	600	750
	500	160	5	2670	4800	23160	134	670	850
	500	160	5	2670	4800	23160/W33	133	670	850
	500	200	5	3100	5800	24160C	160	530	670
	500	200	5	3100	5800	24160C/W33	159	530	670
320	440	90	3	1060	2390	23964K	45.1	900	1200
	480	121	4	1380	3260	23064	81.5	800	1000
	480	121	4	1380	3260	23064/W33	80.9	800	1000
	480	160	4	2440	5050	24064	103	560	700
	540	218	5	3550	6650	24164	252	480	600
	540	218	5	3550	6650	24164/W33	252	480	600