23160 CA W33 Spherical Roller Bearing 300×500×160 mm

Spherical roller bearing23160 CA W33

Boundary Dimension: 300×500×160 mm ,Weight: 133kg.

Shape location tolerance should be to current standard.

Spherical roller bearing have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

Spherical roller bearing are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.

Spherical roller bearing23160 CA W33

The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.

In addition to the standard range, offers a wide range of special spherical roller bearings adapted for specific applications.

Spherical roller bearing, whose inner rings have two raceway, and outer raceways are spherical. The centers of curvature of outer raceways are also the bearing centers. The bearings possess self-aligning performance, the permissible disalignment angle is 1-2.5 degree, and can be used in certain permanent deflective application.

These bearings are able to carry high radial loads, as well as axial loads at the same time, but not pure axial loads, the axial carrying bearing will be needed if axial loads were higher. The contact between rollers adn raceways are so close, so the friction is higher than cylindrical roller beairngs, and their limiting speed is lower.

The basic types of spherical roller bearings are type C and CA, according to different cages and whether inner rings are with ribs. Type C beairng has inner ring without rib, and use steel pressed cage. type CA bearing has inner ring with two ribs, and adopt machined solid cage.

Spherical roller bearings are especially suitable for applications required heavy or shock loads.

Spherical roller bearing23160 CA W33

1.Open bearings

Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.

C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.

CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring

CAF-- As CA, but with a steel cage.

ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.

ECAF-- As ECA, but with a steel cage.

E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

Spherical roller bearing   23160 CA W33

CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring

With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the

- other series have a taper of 1:12, designation suffix K.

Spherical roller bearings23160 CA W33

Boundary Dimensions				Basicload ratings		Designations	Mass	LimitingSpeeds
mm				KN		r/min
d	D	B	rmin	Cr	Cor	Current	kg	Grease	Oil
190	280	67	2.5	542	978	2638	13.7	1000	1400
	290	75	2.1	626	1230	23038	20.5	1300	1700
	290	75	2.1	626	1230	23038/W33	20.3	1300	1700
	320	128	3	1200	2100	24138CA/W33	42	850	1100
	340	92	4	1070	1650	22238CA	36	1200	1600
	340	120	4	1410	2490	23238CA	51	850	1100
	400	132	5	1400	2530	22338	80.6	850	1100
	400	132	5	1400	2530	22338/W33	79.6	850	1100
200	310	82	2.1	655	1310	23040	26.2	1200	1600
	310	82	2.1	655	1310	23040/W33	26	1200	1600
	310	109	2.1	1130	2120	24040CA/W33	30.5	900	1200
	340	112	3	930	2010	23140	50.9	950	13000
	340	140	3	1530	2950	24140C	52	800	1000
	340	140	3	1530	2950	24140C/W33	51.9	800	1000
	360	98	4	940	1740	22240	44.7	1100	1500
	360	98	4	940	1740	22240/W33	44.2	1100	1500
	420	138	5	1530	2720	22340	95.3	850	1100
	420	138	5	1530	2720	22340/W33	95.3	850	1100
220	320	76	3	758	1280	2644	21.6	1000	1400
	370	120	4	1050	2350	23144	54	900	1200
	370	120	4	1050	2350	23144/W33	53.5	900	1200
	400	108	4	1200	2220	22244	57.6	950	1300
	400	108	4	1200	2220	22244/W33	57.1	950	1300
	400	144	4	2070	3620	23244	94.6	750	950
	400	144	4	2070	3620	23244/W33	94.2	750	950
	460	145	5	1700	3200	22344	130	750	950
	460	145	5	1700	3200	22344/W33	130	750	950
230	420	114	4	1600	2600	22246	69.5	750	950
240	360	92	3	820	2060	23048	37.6	1000	1400
	360	92	3	820	2060	23048/W33	37.4	1000	1400
	360	118	3	1380	2700	24048CA/W33	41.7	800	1000
	400	128	4	1200	2850	23148	77.2	850	1100
	400	128	4	1200	2850	23148/W33	75.2	850	1100
	400	160	4	2100	3980	24148/W33	81.6	670	850
	440	120	4	1870	2890	22248	85	900	1200
	440	160	4	2490	4490	23248	128	670	850
	440	160	4	2490	4490	23248/W33	127	670	850
	500	155	5	1780	3250	22348	154	670	850
	500	155	5	1780	3250	22348/W33	153	670	850