24160 CC W33 Spherical Roller Bearing 300×500×200 mm

Spherical roller bearing24160 CC W33

Boundary Dimension: 300×500×200 mm ,   Weight: 159kg.

Shape location tolerance should be to current standard.

Spherical roller bearing have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

Spherical roller bearing are leading in design and can, in addition to high radial loads, accommodate high axial loads acting in both directions.

Spherical roller bearing24160 CC W33

The standard range of SKF spherical roller bearings comprises
- open bearings
- sealed bearings
- bearings for vibratory applications.

In addition to the standard range, offers a wide range of special spherical roller bearings adapted for specific applications.

Spherical roller bearings, whose inner rings have two raceway, and outer raceways are spherical. The centers of curvature of outer raceways are also the bearing centers. The bearings possess self-aligning performance, the permissible disalignment angle is 1-2.5 degree, and can be used in certain permanent deflective application.

These bearings are able to carry high radial loads, as well as axial loads at the same time, but not pure axial loads, the axial carrying bearing will be needed if axial loads were higher. The contact between rollers adn raceways are so close, so the friction is higher than cylindrical roller beairngs, and their limiting speed is lower.

Spherical roller bearing 24160 CC W33

The basic types of spherical roller bearings are type C and CA, according to different cages and whether inner rings are with ribs. Type C beairng has inner ring without rib, and use steel pressed cage. type CA bearing has inner ring with two ribs, and adopt machined solid cage.

Spherical roller bearing are especially suitable for applications required heavy or shock loads.

Spherical roller bearing

1.Open bearings

Spherical roller bearings are produced in several designs, depending on bearing series and size. The differences are
- the arrangement of the floating guide ring as well as
- the design of the inner ring and/or cages,
as described in the following.

C(J), CC--Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

EC(J), ECC(J)--Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.

CA--One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring

CAF-- As CA, but with a steel cage.

ECA, ECAC-- Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.

ECAF-- As ECA, but with a steel cage.

E-- For bearings with a bore diameter d ≤ 65 mm: Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring

CAFA-- One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring

With some exceptions, all SKF spherical roller bearings are produced with a cylindrical bore as well as with a tapered bore. The tapered bore of bearings in the

- other series have a taper of 1:12, designation suffix K.

Spherical roller bearing24160 CC W33